Another "Must Have" item

These where designed with gift ideas in mind. Affordable enough so that a child can afford to purchase one with their own allowance or hard earned money and yet not break the bank. These also have proven to be great stocking stuffers.

Available at the retail outlets below

Show your Bronco spirit!
Here's  neat way you can show off to the world your Bronco Spirit. Laser cut of 16ga cold roll steel or stainless, this is an perfectly scaled down early bronco. There are mounting tabs that can easily be bent so the mounting is easy. The possibilities of where to mount your Topper is unlimited. It comes in raw steel or stainless so you can refinish in your choice of colors to match your rig.

We've had pictures sent back to us from customers who've put them on garage doors, weathervanes, flag poles, mailboxes or just to display in a collection of bronco goodies.

A new tool for old Fords

When taking dash boards apart, I never had a proper tool for removing the small bezel nuts that hold the wiper switch and such. I ended up using needle nose pliers. Sometimes I got lucky and they unscrewed alright, other times the nuts got torn up or I slipped and scratched the dash.

I'd seen the ones that are similar to a screw driver or the sockets. I wanted a much more control & torque for these old stubborn fragile nuts.
So you know me~ I made my own. I came up with an ergonomic T-Handle design. They are now available to the general public. These are CNC machined from DOM tube, once assembled I send them off to be plated. This will keep them looking good for years.

This tool is applicable with F-series trucks, Mustangs, Falcons & such.

Available at the retail outlets below

Eliminate Dash Scratches
This little piece is designed to fit around the bezel of your iginition key and protect the dash from your swinging keys as you go down the road or trail. It's made from 16 Ga. Brushed Stainless Steel and has a tough adhesive backing so there are no holes to drill in your beautiful dash. The size of thedash saver is 1x 3 1/2". Being stainless it will last for years and look great doing so. This is one tough puppy, don't be fooled by it's good looks... often duplicated... get the original!

These where designed with gift ideas in mind. Affordable enough so that a child can afford to purchase one with their own allowance or hard earned money and yet not break the bank. These also have proven to be great stocking stuffers.

Available at the retail outlets below

This is the one that started it all!
This is a modern production version of the classic windshield knob. The original was a sand cast part that was chrome plated. It had a steel stud that inadvertently rusts into the windshield frame nut.

The Retro Knob is a CNC produced part to our own specs and design. It is made from aerospace grade aluminum, that is then sent to the anodizers to work their magic on. They treat the pieces to a electrical-chemical polish, then they are dipped in the various baths. They are available in either a Clear coat, Radiant Red or Bold Blue. The red and blue are similar to what you see on a AN plumbing fitting. Being anodized they will look great for years to come, and never chip or peel off like a sprayed on clear can. To finish off the knob, we put a machined stainless steel stud in. This way they will provide years of great looks and will be removable when needed.

This knob is often imitated but not duplicated. Don't settle for anything less but the best billet knob out there.

You can order your set today directly through one of our authorized dealers.

Available at the retail outlets below

A new look for an old part!
Here's our take of a modern style column cover. We wanted to dress the part up with some detailed machine work to give it a fresh look. With all the new aftermarket columns out there, it was time to have a bezel that was designed to fit the smaller diameter tube they use. These also come in a size to fit the factory column.

These are CNC machined to our design. From the machine shop they head to the anodizers to get done in Clear to protect the looks.

The two halfs are located with stainless dowel pins to insure you have proper alignment when installed.

Available at the retail outlets below

Bringing the "Bling" to Body Lifts
When Nick's Trix decided to produce a body lift, you know it wasn't going to be a run of the mill looking setup. Starting out with aerospace grade aluminum, the parts are CNC machined to our own zoomie design. Once machined, they head off to the trusty anodizer so that they can work their magic on them.

Being anodized, they will look great for years to come. No polishing oxidized material, no chipping of sprayed on clear coat. Just great looking maintenance free parts. They are available only in the Clear, the 2" is available in annodized blue from James Duff only.The Billet Body Lifts come in 1 or 2 inch size and packaged 8 to a set.

Available at the retail outlets below

Bring on the Finger Bling!
You just can't have the old plastic door cups that get all faded and cracked in your rig. These CNC machined billet aluminum door cup are just what the doctor ordered. Precision machined to fit exactly like the original plastic ones, these are the permanent solution to cracked plastic!

Nick's Trix has these babies annodized clear after the milling process for a superior finish and look. No cracking clear coats here. This is the REAL DEAL!

Available at the retail outlets below

By popular demand here it is!
A complete bolt in latch assmebly to will enable you to help secure your bronco. Manufactured from factory correct , all NEW aftermarket replacement parts. We've taken the handle and machined it to accept the weather rated lock that we installed. When in the key is turned in the locked position, the handle is unable to swing open. This keeps the tailgate closed.

We're using a weather rated new lock cylinder with a stainless bezel. It comes with 2 keys. This is a simple direct bolt on replacement taking only about 5 minutes with just basic hand tools.

Unit comes completely assembled and ready to install.

This set up also works on the late 60's, early 70's Ford trucks.

Available at the retail outlets below

NEW! The next greatest thing for your suspension!

Stock shackles leave something to be desired. We have seen them fail on the trail from years of use and abuse. Nick's Trix new fully tig welded Super Shackles are at home in high abuse environments. They are also a work of art. They come plated for corrosion resistance and high tech look. Nick's TriX Super Shackles accepts aftermarket urethane bushings (not the stock press-in types).

Available at the retail outlets below